Scrap Segregation

Identify and sort out nonferrous, airtight, nonstandard material while supplying to maintain segregated scrap stock for 2 to 3 charges in advance.
To follow Scrap segregation and loading of scrap in to dump truck as per HIRA pertaining to these activities and operating procedure.
To coordinate with equipment operators, Pulpit operators, Truck scale operator and shift in charge for uninterrupted scrap supply,
To control unauthorized dumping at scrap supply area

Additive Supply

To receive the requirement of additives to be supplied to EAF/LAF and to check with equipment and conveying system.
To monitor right material is supplied to right hoppers as per the operating procedure.
To coordinate with nominated Dump truck and wheel loader for identifying, supply of additives and to provide weighment of each material at Trucks scale
To operate lime storage silos to supply and receiving Limp lime / Dolo Lime to the hoppers and respective silos, and to coordinate with Lime calcined plant for receiving Dolo/Lime to storage silo or alloy pit.
To prepare material which is received in bags at alloy pit and to assure that no foreign material carries over with additives.
To coordinate with EAF shift in charge of starting conveyors of EF ground hopper for charging requested materials.

Slag pot Changer

To follow operating procedure and HIRA pertaining to this job
To maintain Slag pot cycle as provided and to confirm slag pot temperature as per operating procedure
To inspect loaded slag pot from rear side after lifting the slag pot to avoid any abnormalities and to provide go ahead signal in case slag pot is normal
To maintain slag pit floor to place in slag pot in proper condition.
To assist in Slag pot carrier operator for safe placing and removal of slag pot at Slag pit and ladle pit, coordinate with SPC operator when safe access provided or evacuation is required from slag pit as per operating procedure.
To coordinate with EAF control room or shift in charge for any emergency.
To handle abnormal slag pots as per operating procedure.
To implement traffic restriction during abnormal slag pot handling and molten slag overflow.

Requirements

Qualifications

Higher Secondary School or Technical Diploma / Certification or equivalent qualification.
Computer literate (MS Office)
Literacy read and write (English)

Experience and requirements

Minimum 3 years relevant experience at Steel plant in Scrap Handling, Slag handling & Ferro alloys handling.
Qualified Rigger 3rd party certificate
Certified for Handling & Inspection of Hazardous Scrap Materials.

المهارات المطلوبة

Scrap segregation and material identification (nonferrous, airtight, nonstandard)Scrap loading operations into dump trucksHIRA and operating procedure compliance (safety procedures)Operational coordination with equipment operators, pulpit, truck scale and shift in chargeControl of unauthorized dumping and site accessAdditives supply management for EAF/LAF (routing materials to correct hoppers)Lime storage silo operation and coordination with calcined plantMaterial weighment and truck scale operationsInspection and quality control of bagged additives (prevent foreign material carryover)Slag pot operation, inspection and temperature monitoringSlag pot handling safety coordination, traffic restriction implementation and emergency responseRigging (qualified rigger – 3rd party certificate)Handling and inspection of hazardous scrap materials (certified)Computer literacy (MS Office)English reading and writing literacy

وظائف مشابهة